Home > Tactical Slings > 3 Point Slings > SOP Slings > Rifle/Carbine/SMG SOP Slings >

M-249 SAW
SOP 3 Point Sling

M-249 SAW SOP 3 Point Tactical Sling


 
Alternative Views:


M-249 SAW SOP Sling

Our Price: $45.33
(+ 10% for camo patterns)


Product Code: 225

Color Options

Colors*:
Black w/ Black Pad
Olive Drab w/ Olive Drab Pad
Coyote w/ Coyote Pad
Coyote w/ Multicam Pad

Qty:  
Description
 
Due to overwhelming demand for something more useful than the primitive 2 point carry strap currently in service, we've designed a special variant of the Special Operations Patrol (SOP) 3 Point Tactical Sling specifically for the M-249 Squad Automatic Weapon (SAW).

The SAW SOP Sling possesses all of the same features and functional abilities of the standard SOP Sling. However, we've added several features to meet the unique demands of this particular weapons system.

First off, we've added a removable and adjustable 2" wide x 3/8" thick EVA foam shoulder pad for additional comfort.

Secondly, we use heavy duty, all steel, mil-spec snap hooks at the front and rear attachment points to interface with the existing ring mounts on the M-249, which allows the sling to be removed or attached in just seconds.

Lastly, we use all steel tri-glides to ensure the weight of the weapon will not cause a hardware failure. In short, this is the most heavy duty sling system we've ever designed.

The SAW SOP Sling is an ambidextrous design. Therefore, no left or right hand versions are required.
Features

When we designed the SOP sling our intent was to produce the ultimate tactical patrol sling design, incorporating every positive feature suggested to us by end users as well as addressing, and solving, every negative issue relating to conventional 3 point sling designs that we had identified.

Since it's introduction into the marketplace, the SOP Sling has been called the next evolutionary step in 3 point tactical sling design. Here are a few reasons why and how it differs from our standard CQB Slings.

To begin with 1.5" wide webbing is used for the sling strap. It's exactly the same type of webbing used on our CQB Slings except for being wider. The purpose of the 1.5" width is to better distribute the weight of the weapon.

The next difference has to do with how the sling attaches to the weapon. We feel that a good sling design should work with the weapon, not against it. Conventional 3 point slings that are solidly attached to the side of the weapon don't hang well in anything but the Off Side Drop carry mode and have a tendency to bind up and limit efficient movement of the weapon during positional shooting. So, for the SOP Sling, we chose flexible 1" attachment straps to be used at each end of the sling to interface with the mounting adapter sling loops or sling swivels. The 1" straps move, shift and conform within the sling loops to allow the SOP Sling to move more efficiently with the weapon thus enhancing free movement of the weapon and allowing the weapon to hang in a more vertical orientation while being used in the Military Patrol Ready carry mode.

Another change is the ability for this sling to be set up for left or right handed operators. All of our SOP mounting adapters (If applicable) are set up with right and left hand mounting points. With the attachment strap feature it's a simple matter to attach the sling to the mounting adapters for use on either side. So, there is no right or left hand specific version necessary. The adapter strap feature also allows the user the flexibility to experiment with user specific custom mounting solutions.

Those are all great features. However, the feature that sets this sling apart from any other is the Transition Release Buckle (TRB). The TRB allows the sling to be quickly and efficiently extended to instantly create slack that allows for easy left/right shoulder transitions. This feature addresses a common complaint associated with conventional 3 point tactical sling designs. With those types of slings it's very difficult, if not impossible in some cases, to execute a cross shoulder transition. This creates a serious problem in an urban environment.

With the TRB feature the sling can be used exactly like a conventional 3 point design, allowing all of the same carry options. However, when the need to cross shoulder transition is anticipated, simply flip the TRB release with the non firing hand thumb and the 3rd point of the sling is silently released to slide freely along the sling allowing you to extend and mount on the opposite shoulder. The sling, however, is still attached and still functional allowing you to "let it hang" should a secondary weapon transition be called for.

When the time comes to re-lock the TRB, it can done so quickly, silently, and with just one hand needed, allowing the shooter to maintain a constant firing grip on the weapon. The TRB can also be locked in wherever the shooter finds it comfortable. This feature allows for convenient expansion and contraction of the sling's body loop as the operator's mission profile changes and more, or less, load bearing equipment is worn.