Specter Gear
Mossberg 500 Side Sling Mount Plate

Side mounting is the only way to properly mount a "3 Point" tactical sling. Until now there has been no way to do this with a Mossberg 500 shotgun. This sling mount plate installs underneath the magazine bolt and  locks in place by ball detent. The sling plate is made from steel, has a matte black finish, accepts up to 1 1/4" wide slings and is completely ambidextrous.

Note: Requires a simple modification of the magazine bolt. For more information see our magazine bolt modification instructions.

Product # 161
Price - $ 12.50 

Remington 870P, 11/87P & Mossberg 590A1 Side Sling Mount Plates

Side mounting is the only way to properly mount a "3 Point" type tactical sling. This sling mount plate installs underneath the magazine cap and  locks in place by ball detent. The sling plate is made from 4130 steel, has a parkerized finish and accepts up to 1 1/4" wide slings. 

The following models are available:

Remington 870 & 11/87
Product # 158
Price - $ 10.00 

Mossberg 590A1
Product # 160
Price - $ 10.00 

GG&G items will not be accepted for return if their original packaging has been opened. Please feel free to call or email us if you have any questions as to whether or not a particular GG&G item will be appropriate for your weapon or sling mounting needs.

G. G. & G.  M-4 / CAR-15 Receiver Sling Mount
(Rectangular Type)

Allows receiver side mounting of our CQB, SOP and HST slings on collapsible stock M-4/CAR-15 type weapons. Right hand and left hand specific versions are available. 

Note: While this is an easily accomplished, non-permanent modification of the weapon, qualified armorer/gunsmith installation is recommended. 

Right Hand
(For right handed shooters, loop extends off to the left side of the weapon)
Product # 162 RH 
Price - $ 25.00     

Left Hand
(For left handed shooters, loop extends off to the right side of the weapon)
Product # 162 LH 
Price - $ 25.00     

GG&G items will not be accepted for return if their original packaging has been opened. Please feel free to call or email us if you have any questions as to whether or not a particular GG&G item will be appropriate for your weapon or sling mounting needs.

Certain local, state and federal agencies have now established policies indicating that if a tool needs to be used to remove a part of the weapon to install a new accessory it cannot be done unless the weapon is sent to the agency's armorer or gunsmith for the installation. This has caused a problem for some agencies due to time constraints and the absence of local agency armorers. GG&G has developed the New Agency Rear Sling Adapter to assist these agencies with this issue. The new GG&G Agency Rear Sling Adapter only requires that the rear assembly of the collapsible buttstock be removed. No tools required. The new adapter then slides over the tube and, once in proper position, securely tightens behind the castle lock nut. The system uses two socket head screws for fastening, so that once tightened there is no chance the sling adapter will come loose. The Agency Rear Sling Adapter is manufactured for professional use from 7075 aluminum and hard anodized to meet Mil-Specs. A 9/64" wrench is included for your convenience.

G. G. & G. "Agency" Ambidextrous Receiver Sling Mount
Product # 321
Price - $ 29.95    

G. G. & G.  AR-15 / M-16 Receiver Sling Mount
(Rectangular Type)

Allows receiver side mounting of our CQB, SOP and HST slings on fixed stock AR-15/M-16 type weapons. Right hand and left hand specific versions are available.

Note: While this is an easily accomplished, non-permanent modification of the weapon, qualified armorer/gunsmith installation is recommended. 

Right Hand
(For right handed shooters, loop extends off to the left side of the weapon)
Product # 211 RH 
Price - $ 35.00     

Left Hand
(For left handed shooters, loop extends off to the right side of the weapon)
Product # 211 LH 
Price - $ 35.00     

GG&G items will not be accepted for return if their original packaging has been opened. Please feel free to call or email us if you have any questions as to whether or not a particular GG&G item will be appropriate for your weapon or sling mounting needs.

G. G. & G.  Shotgun Receiver Sling Mount
(Rectangular Type)

Allows receiver side mounting of our CQB, SOP and HST slings on Remington 870 / 11/87 or Mossberg 500 / 590 shotguns. Right hand and left hand specific versions are available.

Note: While this is an easily accomplished, non-permanent modification of the weapon, qualified armorer/gunsmith installation is recommended. 

Remington 870 / 11/87
(For right handed shooters, loop extends off to the left side of the weapon)
Right Hand
Product # 212 RH 
Price - $ 27.00     

Remington 870 / 11/87
(For left handed shooters, loop extends off to the right side of the weapon)
Left Hand
Product # 212 LH 
Price - $ 27.00     

Mossberg 500 / 590
(For right handed shooters, loop extends off to the left side of the weapon)
Right Hand
Product # 213 RH 
Price - $ 27.00     

Mossberg 500 / 590
(For left handed shooters, loop extends off to the right side of the weapon)
Left Hand
Product # 213 LH 
Price - $ 27.00     

Benelli M1/M3
(For right handed shooters, loop extends off to the left side of the weapon)
Right Hand
Product # 226 RH 
Price - $ 27.00     

Benelli M1/M3
(For left handed shooters, loop extends off to the right side of the weapon)
Left Hand
Product # 226 LH 
Price - $ 27.00     

GG&G items will not be accepted for return if their original packaging has been opened. Please feel free to call or email us if you have any questions as to whether or not a particular GG&G item will be appropriate for your weapon or sling mounting needs.

G. G. & G.  AR-15 / CAR-15 "Sling Thing"

The G. G. & G "Sling Thing" is the most secure and efficient setup to secure a tactical "3 Point" type sling to AR-15 and CAR-15 type weapons. The front "Sling Thing" attaches to the standard AR-15 / CAR-15 front sight assembly offering a sling attachment mounted high enough to prevent rifle roll as well as allowing sling attachment for weapons equipped with the Surefire Millennium weapon light assemblies. The rear Sling Thing is mounted to the side of the collapsible buttstock on CAR-15 and M-4 type carbines. The "Sling Thing" is easy to install, and remove. It's ambidextrous, and there is no gunsmithing required. The "Sling Thing" utilizes M-16 type 1 1/4" sling loops and is phosphate finished to match your weapon. 

GG&G items will not be accepted for return if their original packaging has been opened. Please feel free to call or email us if you have any questions as to whether or not a particular GG&G item will be appropriate for your weapon or sling mounting needs.

Note: A QD Swivel is included with each QD Sling Thing